===================================================================
Application for Setting IP address
March 2003
Copyright 2003 Tally Printer Corporation. All rights Reserved.
===================================================================
Thank you for choosing the Tally Network printer.
Please read this information before using the Tally Network Printer.
If user use this printer with TCP/IP protocol, IP address should be set in printer.
This program is for setting IP address. It will help for user to easily set IP address.
This Readme file contains the following four sections:
1) To prepare before using this program
2) To Use this program
3) Troubleshooting
4) Copyright and Trademark Information
1) To prepare before using this program :
-----------------------------------------
a) This program supports Windows OS. (95/98/ME/NT/2000/XP)
b) In order to use this program, you have to install TCP/IP protocol in your PC.
c) To know network card's MAC address, please find network card's address on bracket or print network printer card test page on printer's front panel.
2) To Use this program :
------------------------
a) Turn on the Tally Network Printer.
b) Click this program. (Start -> Program -> Tally Network Printer Utilities -> SetIP -> SetIP.exe)
c) Type the printer's MAC address. or Click "Search Printer" button to find printers on local network.
d) Type IP address, Subnet Mask and Default Gateway.
e) Click Update button.
f) If it successfully is completed, the Tally Network Printer prints NetWork's Test Page.
You can confirm IP address on NetWork Test Page.
3) Troubleshooting :
--------------------
>>> It happened error message.
a) Please check Tally Network Printer's NIC. It must be ON (upper LED) and blinking (lower LED).
b) Please turn off and on the printer. And then, please try from step 2-c) to step 2-e) again.
c) If it isn't solved, please try again on same network. This program uses unicasting for setting IP address.
4) Copyright and Trademark Information :
----------------------------------------
This software is copyrighted 2003 by Tally Ltd.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.