1. rpx92-96.zip Driver
2. README.TXT File Contents

README.TXT Driver File Contents (rpx92-96.zip)

RPX Flash Update Utility, Release 1.1, 7/17/97 (PN 1.01.01-008)

This utility is designed to update the Flash memory on Intel RPX Modules.  

Known problems:
Earlier versions locked out the keyboard during critical activities
to prevent the user from accidentally interrupting the process.
These safeguards were removed due to an error in their implementation.
The user is advised to heed all messages and not reset the system
during the firmware update.  If the update is interrupted or
the firmware is otherwise corrupted, running the program again
should resolve the problem.

To use:

Run from the CD-ROM or copy the files to a bootable DOS diskette or 
hard drive.  Make sure no memory managers are loaded during bootup.  
From the command line, run RPFLASH.EXE.  (If installed to a bootable 
floppy, the autoexec.bat included will launch the application.)

Press <Enter> to go to the main menu.  Select a task from the menu.

The firmware images are 1 MB and will not fit on a floppy with program
and associated files.  If running from a floppy you will need to swap
another floppy in for the image file.  Pressing <Enter> while at
the filename prompt will refresh the directory listings displayed.

The file DRAMFL.IMG must be in the same directory as RPFLASH.EXE.  This
file is a small executive which runs on the i960 and transfers data
between the host memory and the RPX module's Flash memory.