[Msg] M0=Setup High-Speed Counter instruction M1=Setup PID instruction M2=Output value is within latched data register area M3=Confirm M4=Finish M5=Normal frequency M6=Double frequency M7=Next M8=Please input value M9=Value range M10=PID - 16 bits instruction M11=DPID - 32 bits instruction M12=Three times frequency M13=Four times frequency M14=Saturated output value : upper bound should be greater than lower bound M15=Saturated integration value : upper bound should be greater than lower bound M16=Target value is within the setting range of parameter value M17=Present value is within the setting range of parameter value M18=Output value is within the setting range of parameter value M19=Counting direction of counter is not selected yet M20=The conditions for count up and down are the same M21=Return to edition screen to modify or not? M22=The device number should be a octal number M23=Setting range of constant K is K-2,147,483,648 ~ K2,147,483,647 M24=Setting range of constant H is H0000~HFFFF M25=The device number exceeds upper bound: M26=Conditional contact and counter contact are used repeatedly. Do you want to modify? M27=Please back to edition screen to modify. M28=When M1260=On, input point X5 is a reset signal. M29=Do you want to generate initial instruction? M30=Pulse input : X M31=Increasing input : X M32=Decreasing input : X M33=Reset input : X M34=Start input : X M35=A-phase input : X M36=B-phase input : X M37=DHSZ--lower bound of area comparison should be less than upper bound of area comparison M38=High-Speed Counter Instruction Wizard for ES/EX/SS Series M39=High-Speed Counter Instruction Wizard for EP/SA/SX/SC Series M40=comparison value M41=upper bound M42=lower bound M43=High-Speed Counter Instruction Wizard for PB Series M44=High-Speed Counter Instruction Wizard for PC/PA/PH Series M45=The parameter setting of device D is in the special D range (1000~2000) M46=Would you want to modify?Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.