[Msg] M0=Finish M1=Next M2=Baud Rate should be less than 9600 bps, and time out should be greater than 1000ms M3=System will auto change the time-out to 1000 M4=Please input value M5=Are you sure to delete all records? M6=Are you sure to delete this record? M7=This port can not open or be occupied: COM M8=Communication error (COM M9=The ID number between master station and slave station can not be the same. M10=Please check the following slave ID, and make sure to delete or not ? M11=The item numbers of read/write are more than 16, so the value of communication time out must more than 500ms. M12=To avoid communication time out will occour. M13=, current setting value of communication time out is : M14=Recommend going back to modify M15=The setting number of Data register for reading out data is within special data register (D1000 - D1999): M16=The setting number of Data register for writting in data is within special data register (D1000 - D1999): M17=Series : M18=Setting range of slave communication address (ID) : M19=Device M20=Value M21=ID M22=Reading addr. M23=Reading num. M24=Writting addr. M25=Writting num. M26=Please make sure that have setup all conditional clause ! M27=Yes : Product instruction codes and close editor window of wizard M28=No : Go back to editor window M29=Current item numbers of reading out data or writing in data are more than 16, its number will be reset to 0 M30=Slave ID address :Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.