4 Port USB RS-232 Module Driver Release 2.46 Windows 95 Disk contains the following files: genedge.inf -- information for 4 Port USB RS-232 Module genport.inf -- information for serial ports ionpenum.vxd -- serial port enumerator ionport.vxd -- serial port driver edgeser.sys -- USB port driver readme.txt -- this read me file edgeport.exe -- Status/Configuration program edgeui.dll -- Property page usbready.exe -- Verify system support for USB Release Notes: ============== v2.46 (Released 8/20/03) ------------------------ 1. Fixed multiprocessor bug that caused system lockup. 2. Fixed grouping of compound devices together when running in "COM port based on Physical USB port" mode. 3. Fixed friendly name when running in "COM port based on Physical USB port" mode. 4. Fixed display bug when using TI devices on Windows XP, it would see the devices out of order sometimes. 5. Fixed bug where Edgeport.exe was unable to see devices that had improperly formatted serial numbers. 6. Fixed TI Firmware for Set/Clear Break for /2i, /1i, /4s; if in 485 mode. 7. Added support for 3410 1 Port RS232 USB Director. 8. Added support for 5052 4 Port RS232 USB Director. 9. Added uninstall support for Edgeports that have been installed using the AnywhereUSB bus instead of USB bus. How to update your Existing Driver ================================== In order to update the USB RS-232 Module drivers perform the following steps: 1. Place the updated USB RS-232 Module driver disk into floppy drive "A" 2. Right Click on the My Computer Icon on the desktop and select 'Properties' 3. Select the Device Manager Tab. 4. Double Click on the Universal Serial Bus Controller device. 5. Double Click on the USB RS-232 Module device. (Warning! do not select the USB RS-232 Module Serial Ports device.) 6. Select the Driver Tab. 7. Click on Update Driver, then click Next and follow the directions on the screen. From this point on, the update process is identical to the initial installation process. 8. Due to limitations in the USB support for Windows 95 OSR2.1, you must now reboot your computer in order for the updated drivers to take effect. Release information: =================== Problem: If after installing the Microsoft USB supplement (usbsupp.exe), Windows plug & play does not auto detect the USB RS-232 Module. Solution: Try the following: 1. Open the System Properties from the control panel and select the Device Manager Tab. Double Click on the Universal Serial Bus Controller device. Make sure that both the ROOT HUB and HOST Controller are listed. If only the HOST Controller is listed then remove it and reboot. 2. Open the System Properties from the control panel and select the Device Manager Tab. Check for a device labeled ?UNKNOWN. Double Click on UNKNOWN and check for a HOST Controller or ROOT HUB If listed then remove them and reboot If, after rebooting, the Add Hardware Wizard finds the USB devices and requires new drivers, such as uhcd.sys, the drivers are located in the /windows/system directory.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.