1. nx10100d.zip Driver
2. LANTASTI.TXT File Contents

LANTASTI.TXT Driver File Contents (nx10100d.zip)

=====================================================================
*                                                                   *
*                   32-bit PCI FAST ETHERNET ADAPTER                *
*           NDIS/2 DRIVER FOR LANTASTIC DRIVER INSTALLATION         *
*                                                                   *
=====================================================================


  Content:
  --------

      A) Install NDIS2 drivers for LANtastic 5.0

      B) Install NDIS2 drivers for LANtastic 6.0


A) Install NDIS2 drivers for LANtastic 5.0
   ========================================

   LANtastic 5.0 can support the following driver: NDIS driver


   Using the NDIS driver:
   ----------------------
   Under NDIS, use the "FE32ND.DOS" driver for the 
   32-bit PCI Fast Ethernet adapter.  Users can use the 
   "FE32ND.DOS" driver to replace AEXNDIS.DOS which is the
   NDIS driver offered by ARTISOFT.

   Example  -----  CONFIG.SYS

        DEVICE=C:\LANTASTI\PROTMAN.DOS /I:C:\LANTASTI
        DEVICE=C:\LANTASTI\FE32ND.DOS


   Example  -----  AUTOEXEC.BAT / STARTNET.BAT

        C:\LANTASTI\AI-NDIS BIND_TO=FE32ND_NIF
        C:\LANTASTI\AILANBIO
        C:\LANTASTI\REDIR MachineName


   Example  -----  PROTOCOL.INI

        [PROTMAN]
           DRIVERNAME = PROTMAN$
           DYNAMIC = YES

        [FE32ND_NIF]
           DRIVERNAME = FE32ND$

   Comments:
     If you are using PROTMAN.DOS V1.x, you must use the NO_BIND
     option on the AI-NDIS command line in the STARTNET.BAT,
     and you need to run NETBIND.EXE V1.x before AILANBIO.EXE.


B) Install NDIS drivers for LANtastic 6.0
   ========================================

   LANtastic 6.0 can support the following driver: NDIS driver


  Using the NDIS driver:
  ----------------------

   To install the NDIS driver "FE32ND.DOS", users can use the
   LANtastic 6.0  install program, and select "NDIS support for
   network adapters", then insert the 32-bit FAST ETHERNET driver
   diskette, and type the path "A:\NDIS\DOS".  The install program will
   search for "FE32ND.DOS" and "PROTOCOL.INI" and copy these two files
   to the target directory.

   If you have already installed LANtastic 6.0 and need to install
   the 32 BITS PCI Ethernet Adapter, just replace AEXNDIS.DOS with
   the NDIS driver "FE32ND.DOS" in CONFIG.SYS



   Example  -----  CONFIG.SYS

        DEVICE=C:\LANTASTI\PROTMAN.DOS /I:C:\LANTASTI
        DEVICE=C:\LANTASTI\FE32ND.DOS


   Example  -----  AUTOEXEC.BAT / STARTNET.BAT

    @echo ===== Begin LANtastic configuration =====
    SET LAN_CFG=C:\LANTASTI
    PATH C:\LANTASTI;%PATH%
    SET LAN_DIR=C:\LANTASTI.NET

    rem Please obtain the NETBEUI.EXE program from Microsoft
    NETBEUI
    AI-NDIS BIND_TO=AEXNDIS_NIF
    AILANBIO @STARTNET.CFG
    REDIR THOMAS @STARTNET.CFG

    SERVER C:\LANTASTI.NET @STARTNET.CFG
    NET LOGIN \\THOMAS
    @echo ===== End LANtastic configuration =====


   Example  -----  Protocol.ini

    [PROTMAN]
    Priority=NETBEUI
      DriverName = PROTMAN$
      Dynamic = Yes

    [NETBEUI_XIF]
      DriverName = netbeui$
      Sessions = 6
      NCBS = 12
      Bindings = FE32ND_NIF
      LANABASE = 1

    [FE32ND_NIF]
      DriverName = FE32ND$

-----
All trademarks or brand names mentioned are properties
of their respective companies.

--- End of File ---