Norton AntiVirus Intelligent Updater
Installation Instructions
Copyright 1997-1999 Symantec Corporation
All rights reserved
Intelligent Updater
===================
This program automatically updates Norton AntiVirus with the latest
virus definitions. It automatically searches for Norton AntiVirus on
your computer and updates the necessary files.
This document includes installation instructions for the following
platforms:
I. Norton AntiVirus 2.0 for Windows 95
II. Norton AntiVirus 4.0 & 5.0 for Windows 95
III. Norton AntiVirus 3.0 and 4.0 for DOS / Windows 3.x
IV. NT Tools, NT Scanner and Norton AntiVirus 2.0 for Windows NT
V. Norton AntiVirus 4.0 and 5.0 for Windows NT
VI. Norton AntiVirus 2.0 for NetWare
VII. Norton AntiVirus 4.0 for NetWare
VIII. Norton AntiVirus Network Manager
IX. Norton AntiVirus Network Manager for Win95 and WinNT
X. Norton System Center
XI. Norton AntiVirus for NT Server, DEC Alpha version
XII. Norton AntiVirus for OS/2
XIII. Norton AntiVirus for Internet Email Gateways
XIV. Norton AntiVirus for Firewalls
It also includes instructions and resources for manual updates.
XV. Installing Virus Definition Files Manually
XVI. Intelligent Updater File List
XVII. Virus Definition CD information
=====================================================================
Installation Files and Disk Sets
=====================================================================
The Intelligent Updater installation disks or CD contains several
executable files. The filenames change from week to week. They show
the month (mm) and day (dd) that the definitions were released.
Filename: Description:
------------------------------------------------------------------
mmddI32.EXE Intelligent Updater (v4.0) updates
- Norton AntiVirus 4.0 for Windows 95/98
- Norton AntiVirus 5.0 for Windows 95/98
mmddI321.EXE Multiple-file, floppy disk version of mmddI32.EXE
and (above). Copy these files into the same
mmddI322.ZIP directory and run mmddI321.EXE, or run it from a
floppy drive.
mmddN16.EXE Intelligent Updater (v1.7) updates
- Norton AntiVirus for Netware
mmddN161.EXE Multi-file, floppy disk version of mmddN16.EXE
and (above). Copy these files into the same
mmddN162.ZIP directory and run mmddN161.EXE, or run it from a
floppy drive.
mmddI16.EXE Intelligent Updater (v1.7) updates
- Norton AntiVirus for DOS and Windows 3.x
- Norton AntiVirus v2 for Windows 95
- Norton AntiVirus v2 for Windows NT
- NT Tools
- NT Scanner
mmddI161.EXE Multi-file, floppy disk version of mmddI16.EXE
mmddI162.ZIP (above). Copy these files into the same
and directory and run mmddI161.EXE, or run it from a
mmddI163.ZIP floppy drive.
mmddX86.EXE Intelligent Updater (v2.03) updates
- Norton AntiVirus 3.0 & 4.0 for DOS/Windows
- Norton AntiVirus 2.0 for Windows 95
- Norton AntiVirus 4.0 for Windows 95/98
- Norton AntiVirus 5.0 for Windows 95/98
- Norton AntiVirus 2.0 for Windows NT
- Norton AntiVirus 4.0 for Windows NT
- Norton AntiVirus 5.0 for Windows NT
- Norton AntiVirus for NetWare
- pcANYWHERE 32, 7.5 for Windows NT
- Norton Utilities 3.0 for Windows 95/98
- Norton NT Tools
- Norton Utilities 2.0 for Windows NT
This is a large file for administrators who update
multiple versions of Norton AntiVirus. For more
information, refer to the .txt files that come
with this program. It is not available on floppy
disk.
mmddA32.ZIP This is a zip file that contains the definitions
for Norton AntiVirus for NT Server, DEC Alpha
version.
=====================================================================
I. Norton AntiVirus 2.0 for Windows 95
=====================================================================
IMPORTANT! Check the Norton AntiVirus version first
--------------------------------------------------------------------
These new virus definitions are not compatible with older versions
of Norton AntiVirus, and may cause it to report false virus
detections. To see which version you are using, click Help on the
Norton AntiVirus menu bar. Then select About Norton AntiVirus.
Norton AntiVirus 2.0 users should be using version 2.01. If you need
to update Norton AntiVirus, the patch filename is NAV95201.EXE.
This patch is available on the Symantec BBS (541-484-6669), the
Symantec FTP site (ftp://ftp.symantec.com/public/...), the Symantec
Web site (http://www.symantec.com/nav/index_updates.html),
CompuServe, or America Online. You can also call Customer Service
at (800) 441-7234 to order a disk set.
Download or copy the patch file to a temporary directory and run it
to extract the necessary files. Then click Setup to begin the
installation process. After applying this patch, you must update the
virus definition set.
Updating Norton AntiVirus 2.0 virus definition files
--------------------------------------------------------------------
1. Run the file mmddI16.EXE (or mmddI161.EXE if using the multi-file
floppy disk set). The mmdd represents the date of the definition
set. For example, the filename would be 1231I16.EXE for the
December 31 definition set.
2. Follow the instructions on the screen.
3. Start Norton AntiVirus and scan your drive before you reboot
your computer to activate the new virus definitions and rebuild
critical files.
4. Restart your computer so that Auto-Protect uses the new
definitions.
=====================================================================
II. Norton AntiVirus 4.0 & 5.0 for Windows 95
=====================================================================
1. Run the file mmddI32.EXE (or mmddI321.EXE if using the
multi-file, floppy disk set). The mmdd represents the date of the
definition set. For example, the filename would be 1231I32.EXE
for the December 31 definition set.
2. Follow the instructions on the screen.
=====================================================================
III. Norton AntiVirus 3.0 and 4.0 for DOS / Windows 3.x
=====================================================================
IMPORTANT! Check the Norton AntiVirus version first
--------------------------------------------------------------------
Check the date of the Norton AntiVirus executable files (NAV.EXE,
NAVW.EXE) to see if they are earlier than June 1, 1996. If they are,
update them with the UPDATEME.EXE patch.
This patch is available on the Symantec BBS (541-484-6669), the
Symantec FTP site (ftp://ftp.symantec.com/public/...), the Symantec
Web site (http://www.symantec.com/nav/index_updates.html),
CompuServe, or America Online. You can also call Customer Service
at (800) 441-7234 to order a disk set.
These new virus definitions are not compatible with older versions
of Norton AntiVirus, and may cause them to report false virus
detections.
Download or copy the patch file to a temporary directory and run it
to extract the necessary files. Then follow the directions in the
READ.ME file. This patch contains the April 1997 virus definition
set. After applying this patch, you must update the virus definition
set.
Updating NAV 3.0/4.0 virus definition files using Windows 3.x
--------------------------------------------------------------------
1. Run the file mmddI16.EXE (or mmddI161.EXE if using the multi-file
floppy disk set). The mmdd represents the date of the definition
set. For example, the filename would be 1231I16.EXE for the
December 31 definition set.
2. Follow the instructions on the screen.
3. Start Norton AntiVirus and scan your drive before you reboot
your computer to activate the new virus definitions and rebuild
critical files.
4. Restart your computer so that Auto-Protect uses the new
definitions.
Updating NAV 3.0/4.0 virus definition files using DOS
--------------------------------------------------------------------
1. If you are running Windows, exit to DOS. To do this, select Exit
from the File menu.
2. Make sure you have a temporary directory on your system that you
can use to unload the virus definitions. Set this directory in
DOS using the SET command. For example, type SET TEMP=C:\TEMP if
the temporary directory is C:\TEMP.
3. Run the file mmddI16.EXE (or mmddI161.EXE if using the multi-file
floppy disk set). The mmdd represents the date of the definition
set. For example, the filename would be 1231I16.EXE for the
December 31 definition set.
4. Follow the instructions on the screen.
5. Start Norton AntiVirus and scan your drive before you reboot
your computer to activate the new virus definitions and rebuild
critical files.
6. Restart your computer so that Auto-Protect uses the new
definitions.
Troubleshooting
--------------------------------------------------------------------
If the VIRSCAN.ZIP files are not deleted after a failed or
cancelled attempt at updating the virus definitions, they can cause
errors when running the Intelligent Updater program. To prevent
these types of errors, make sure that the temporary directory is
empty before starting the update.
=====================================================================
IV. NT Tools, NT Scanner and Norton AntiVirus 2.0 for Windows NT
=====================================================================
1. Run the file mmddI16.EXE (or mmddI161.EXE if using the multi-file
floppy disk set). The mmdd represents the date of the definition
set. For example, the filename would be 1231I16.EXE for the
December 31 definition set.
2. Follow the instructions on the screen.
3. Start Norton AntiVirus and scan your drive before you reboot
your computer to activate the new virus definitions and rebuild
critical files.
4. Restart your computer so that Auto-Protect uses the new
definitions.
=====================================================================
V. Norton AntiVirus 4.0 & 5.0 for Windows NT
=====================================================================
1. Run the file mmddI32.EXE (or mmddI321.EXE if using the multi-file
floppy disk set). The mmdd represents the date of the definition
set. For example, the filename would be 1231I32.EXE for the
December 31 definition set.
2. Follow the instructions on the screen.
=====================================================================
VI. Norton AntiVirus 2.0 for NetWare
=====================================================================
IMPORTANT! Check the Norton AntiVirus version first
--------------------------------------------------------------------
If your version of NAV 2.0 for NetWare is dated earlier than
December 13, 1995, you must upgrade your software before updating
the virus definition files. The newer releases of Norton AntiVirus
for NetWare v2 detect and remove Microsoft Word and Excel macro
viruses. For information on how to receive the update, call Customer
Service at (800) 441-7234.
To update Norton AntiVirus for NetWare virus definition files:
--------------------------------------------------------------------
1. On a workstation connected to the network, map a drive letter to
the volume and directory where Norton AntiVirus for Netware is
installed. You must have read and write access to the mapped
drive.
2. Disable the Norton AntiVirus for NetWare NLM. To do this, select
DISABLE NLM from the Tools menu in the Norton AntiVirus for
NetWare Windows configuration window. Or, you can press F3 at the
NAVNLM server console screen.
2. At a DOS prompt, change to the directory that contains the
Intelligent Updater file.
3. From a DOS prompt, type mmddN16.EXE [path] (or mmddN161.EXE
[path] if using the multi-file floppy disk set) where the [path]
is the location you mapped in step 1. The mmdd represents the
date of the definition set. For example, the filename would be
1231N16.EXE for the December 31 definition set.
6. Follow the instructions on the screen.
7. Enable the Norton AntiVirus for NetWare NLM. Choose ENABLE NLM
from the Tools menu in the Norton AntiVirus for NetWare Windows
configuration window. Or, you can press F2 at the NAVNLM server
console screen.
8. If you created a temporary drive mapping, delete it.
=====================================================================
VII. Norton AntiVirus 4.0 for NetWare
=====================================================================
1. On a workstation connected to the network, map a drive letter to
the volume and directory where Norton AntiVirus for Netware is
installed. You must have read and write access to the mapped
drive.
2. Disable the Norton AntiVirus for NetWare NLM. To do this, select
DISABLE NLM from the Tools menu in the Norton AntiVirus for
NetWare Windows configuration window. Or, you can press F3 at the
NAVNLM server console screen.
4. At a DOS prompt, change to the directory that contains the
Intelligent Updater file. Type mmddN16.EXE [path] (or
mmddN161.EXE [path] if you are updating from a floppy disk) where
the [path] is the location you mapped in step 1. The mmdd
represents the date of the definition set. For example, the
filename would be 1231I16.EXE for the December 31 definition set.
5. Follow the instructions on the screen.
6. Enable the Norton AntiVirus for NetWare NLM. Choose ENABLE NLM
from the Tools menu in the Norton AntiVirus for NetWare Windows
configuration window. Or, press F2 at the NAVNLM server console
screen.
7. If you created a temporary drive mapping, delete it.
=====================================================================
VIII. Norton AntiVirus Network Manager
=====================================================================
IMPORTANT! Check the Norton AntiVirus version first
--------------------------------------------------------------------
Check the date of the Norton AntiVirus Network Manager executable
file (NAVNET.EXE) to see if it is earlier than June 1, 1996. If it
is, you must update it with the UPDATEME.EXE patch before installing
these definitions. These new virus definitions are not compatible
with older versions of Norton AntiVirus, and may cause it to report
false virus detections.
This patch is available on the Symantec BBS (541-484-6669), the
Symantec FTP site (ftp://ftp.symantec.com/public/...), the Symantec
Web site (http://www.symantec.com/nav/index_updates.html),
CompuServe, or America Online. You can also call Customer Service
at (800) 441-7234 to order a disk set.
Download or copy the UPDATEME.EXE patch file to a temporary
directory. The network files must exist in your local directory or
the UPDATEME.EXE patch will not extract the network files. Copy
NAVNET.EXE and NAVNETW.EXE to your local NAV directory. Then run
UPDATEME.EXE to extract the files. The complete directions are
explained in the READ.ME file.
After updating Norton AntiVirus Network Manager, recreate your .NNS
files using the new _DEFAULT.NNS as a template. For more information
on recreating .NNS files, order FaxBack #913024 from our free
FaxBack service at (541) 984-2490, option 2.
The NAV 3.11 patch contains the April 1997 virus definition set. You
must apply the latest virus definition set update after completing
the program update.
Updating Norton AntiVirus Network Manager virus definitions
--------------------------------------------------------------------
1. On a workstation connected to the network, map a drive letter to
the volume and directory where Norton AntiVirus Network Manager
is installed. You must have read and write access to the mapped
drive.
2. At a DOS prompt, change to the directory that contains the
Intelligent Updater file.
3. Type mmddI16.EXE [path] (or mmddI161.EXE [path] if using the
multi-disk floppy disk set) where the [path] is the location of
the Norton AntiVirus Network Manager that you just mapped. The
mmdd represents the date of the definition set. For example, the
filename would be 1231I16.EXE for the December 31 definition set.
4. Follow the instructions on screen.
5. Start Norton AntiVirus from the Norton AntiVirus Network Manager
directory and scan the Norton AntiVirus Network Manager directory
to activate the new virus definitions and rebuild critical files.
To do this, type NAV from the Norton AntiVirus Network Manager
directory.
=====================================================================
IX. Norton AntiVirus Network Manager for Win95 and WinNT
=====================================================================
Installing the definitions for Network Manager involves three steps.
1. Find the directory where virus definitions are stored.
2. Copy the appropriate Intelligent Updater program to that
directory.
3. Run the Intelligent Updater program using the /dump command to
extract the appropriate files.
Locating the Definitions Directory
--------------------------------------------------------------------
1. Find the .NNS file that Norton AntiVirus uses to distribute
files. To find out which .NNS file the network uses, check the
network login script. If it uses a customized .NNS file, the
login script will specify the location of that file. If not,
search the login script for the location of the NAVCHECK.EXE and
NAV32UP.EXE distribution files. The default .NNS file
(_DEFLT32.NNS) will be in the directory containing NAVCHECK.EXE
and NAV32UP.EXE.
2. Look in the .NNS file for the parameter that points to the virus
definitions directory.
* In NavNet32 v2.0, the parameter "NAVDefDir" points to
the definitions.
* In NavNet32 v4.x, the parameter "NAVDefDir95" points to the
Norton AntiVirus for Windows 95 definitions. The parameter
"NAVDefDirNTWKS" points to the Norton AntiVirus for NT
workstation definitions, and "NAVDefDirNTSRV" points to the
Norton AntiVirus for NT server definitions.
3. Note the definitions directory to be updated.
Updating Definitions for Norton AntiVirus 2.0
--------------------------------------------------------------------
1. Map a drive letter to the network volume and directory containing
the definitions to be updated. You must have WRITE access to the
mapped drive.
2. Copy (do not Move) the mmddI16.EXE file to the mapped network
definitions directory. The mmdd represents the date of the
definition set. For example, the filename would be 1231I16.EXE
for the December 31 definition set.
3. Open a command line session (DOS box) and change to the mapped
drive containing the older definitions and the new Intelligent
Updater program.
4. To update definitions type mmddI16 /DUMP.
5. Delete mmddI16.EXE (or mmddI161.EXE) from the definitions
directory.
Updating Definitions for Norton AntiVirus 4.0
--------------------------------------------------------------------
1. Map a drive letter to the network volume and directory containing
the definitions to be updated. You must have WRITE access to the
mapped drive.
2. Copy (do not Move) the mmddI32.EXE file to the mapped network
definitions directory. The mmdd represents the date of the
definition set. For example, the filename would be 1231I32.EXE
for the December 31 definition set.
3. Open a command line session (DOS box) and change to the mapped
drive containing the older definitions and the new Intelligent
Updater program.
4. To update definitions type mmddI32 /DUMP
5. Delete mmddI32.EXE from the definitions directory.
=====================================================================
X. Norton System Center
=====================================================================
See the Norton System Center documentation for instructions on
distributing virus definitions with Central LiveUpdate. To
distribute virus definition updates without Central LiveUpdate:
1. Download the latest version of Intelligent Updater (v4.0).
2. Copy Intelligent Updater to the definitions folder of your NSC
installation. By default the location is the
\NSC Repository\Products\NAV\Defs\Intel or Alpha folder.
3. To avoid changing the job every time you update the definitions,
rename the Intelligent Updater file as NEWDEFS.EXE and set the
job to run this file. Otherwise you will always have to modify
the job to use the correct file name.
4. Start Norton System Center and run your virus definitions rollout
job. For more information on setting up NSC jobs, see your NSC
documentation.
Whenever you want to distribute updated virus definitions, download
a new Intelligent Updater, copy it to the source distribution
folder, rename it NEWDEFS.EXE, and rerun the job.
=====================================================================
XI. Norton AntiVirus for NT Server, DEC Alpha version
=====================================================================
1. Download the file mmddA32.ZIP.
2. Unzip this file into the Incoming directory:
\Program Files\Common Files\Symantec Shared\VirusDefs\Incoming
3. Norton AntiVirus will automatically begin using the new
definitions.
=====================================================================
XII. Norton AntiVirus for OS/2
=====================================================================
1. Download the file mmddO32.ZIP.
2. Unzip this file into the Incoming directory:
\SYMANTEC\COMMON\SHARED\VIRUSDEFS\INCOMING
3. Norton AntiVirus will automatically begin using the new
definitions.
=====================================================================
XIII. Norton AntiVirus Internet Email Gateways
=====================================================================
IMPORTANT! It is highly recommended that you update this product
With Live Update. If you must use the Intelligent updater then follow
these instructions carefully.
1. Go to the Start menu and select "settings\control panel".
Select "services". Find "NAV for Internet Email Gateways" in the
service list and select it, then select the "stop" button. Select
"yes" when asked to confirm.
2. From a command prompt type "mmddX86.EXE /ieg". Remember the
the "mmdd" represents the date of the definition set so it will
change. For example, the filename would be 1231X86.EXE
for the December 31 definition set.
3. Follow the instructions on the screen.
4. When Intelligent Updater finishes installing the definitions,
Select the "start" button to start the service again.
=====================================================================
XIV. Norton AntiVirus Firewalls
=====================================================================
IMPORTANT! It is highly recommended that you update this product
With Live Update. If you must use the Intelligent updater then follow
these instructions carefully.
1. Go to the Start menu and select "settings\control panel".
Select "services". Find "NAV for Firewalls" in the
service list and select it, then select the "stop" button. Select
"yes" when asked to confirm.
2. From a command prompt type "mmddX86.EXE /fw". Remember the
the "mmdd" represents the date of the definition set so it will
change. For example, the filename would be 1231X86.EXE
3. Follow the instructions on the screen.
4. When Intelligent Updater finishes installing the definitions,
Select the "start" button to start the service again.
=====================================================================
XV. Installing Virus Definition Files Manually
=====================================================================
If you do not want Intelligent Updater to install the new virus
definitions for you automatically, you can use the /DUMP command to
extract the virus definition files, then copy the appropriate files
to the virus definitions folder.
Installing Virus Definition Files Manually
--------------------------------------------------------------------
1. Copy the Intelligent Updater program (mmddI16.EXE, mmddI161.EXE,
mmddI32.EXE, or mmddN16.EXE) to an empty, temporary folder.
2. Launch the Intelligent Updater program using the /DUMP command.
This will extract all the virus definitions to the folder. For
example, type mmddI32.EXE /DUMP to extract the files. The mmdd
represents the date of the definition set. For example, the
filename would be 1231I32.EXE for the December 31 definition set.
3. Copy the files to the virus definition folder. If you are using
Norton AntiVirus 4.0 or 5.0 for Windows 95 / Windows NT Server &
Workstation, copy the files to this location:
C:\Program Files\Common Files\Symantec Shared\VirusDefs\Incoming\
NOTE: Copy the file ZDONE.DAT last. This file signals Norton
AntiVirus that the definition set has been completely loaded. If
it is not loaded last, it may cause errors.
4. Refer to the Intelligent Updater File List below for information
on which files to copy into the Norton AntiVirus folder.
=====================================================================
XVI. Intelligent Updater File List
=====================================================================
Norton AntiVirus 2.0 for Windows 95
--------------------------------------------------------------------
VIRSCAN.DAT
VIRSCAN.INF
VIRSCAN2.DAT
NAVEX32.DLL
NAVEX.VXD
NAVEX.EXP
TECHNOTE.TXT
UPDATE.TXT
WHATSNEW.TXT
NCSACERT.TXT
Norton AntiVirus 3.0 for DOS/Windows
--------------------------------------------------------------------
VIRSCAN.DAT
VIRSCAN2.DAT
VIRSCAN.INF
NAVEX.EXP
NAVEX16.DLL
TECHNOTE.TXT
UPDATE.TXT
WHATSNEW.TXT
NCSACERT.TXT
Norton AntiVirus 4.0 for DOS/Windows
--------------------------------------------------------------------
VIRSCAN.DAT
VIRSCAN2.DAT
VIRSCAN5.DAT
VIRSCAN.INF
NAVEX.EXP
NAVEX16.DLL
TECHNOTE.TXT
UPDATE.TXT
WHATSNEW.TXT
NCSACERT.TXT
Norton AntiVirus 4.0 & 5.0 for Windows 95/NT Server & NT Workstation
--------------------------------------------------------------------
VIRSCAN1.DAT
VIRSCAN2.DAT
VIRSCAN3.DAT
VIRSCAN4.DAT
VIRSCAN5.DAT
VIRSCAN6.DAT
VIRSCAN7.DAT
VIRSCAN8.DAT
VIRSCAN.INF
NAVEX32A.DLL
NAVEX15.EXP
NAVEX15.SYS
NAVEX15.VXD
NAVENG.EXP
NAVENG.VXD
NAVENG.SYS
NAVENG32.DLL
CATALOG.DAT
NCSACERT.TXT
TECHNOTE.TXT
WHATSNEW.TXT
UPDATE.TXT
ZDONE.DAT
Norton AntiVirus 2.0 for Windows NT
--------------------------------------------------------------------
VIRSCAN.DAT
VIRSCAN2.DAT
VIRSCAN.INF
NAVEX.SYS
NAVEX32.DLL
TECHNOTE.TXT
UPDATE.TXT
WHATSNEW.TXT
NCSACERT.TXT
Norton AntiVirus 2.0 for NetWare
--------------------------------------------------------------------
VIRSCAN.DAT
VIRSCAN.INF
VIRSCANM.DAT
NAVEX.NLM
TECHNOTE.TXT
UPDATE.TXT
WHATSNEW.TXT
NCSACERT.TXT
Norton AntiVirus 4.0 for NetWare
--------------------------------------------------------------------
VIRSCAN.DAT
VIRSCAN1.DAT
VIRSCAN2.DAT
VIRSCAN3.DAT
VIRSCAN4.DAT
VIRSCAN5.DAT
VIRSCAN6.DAT
VIRSCAN7.DAT
VIRSCAN8.DAT
VIRSCANM.DAT
VIRSCAN.INF
NAVEX15.NLM
NAVENG.NLM
TECHNOTE.TXT
UPDATE.TXT
WHATSNEW.TXT
NCSACERT.TXT
ZDONE.DAT
Norton AntiVirus Internet Scanner for Windows 3.1
--------------------------------------------------------------------
VIRSCAN.DAT
VIRSCAN.INF
NAVEX16.DLL
TECHNOTE.TXT
UPDATE.TXT
WHATSNEW.TXT
NCSACERT.TXT
Norton AntiVirus Scanner for Windows NT, Norton NT Tools and
Internet Scanner for Windows 95
--------------------------------------------------------------------
VIRSCAN.DAT
VIRSCAN.INF
NAVEX32.DLL
TECHNOTE.TXT
UPDATE.TXT
WHATSNEW.TXT
NCSACERT.TXT
=====================================================================
XVII. Virus Definitions CD
=====================================================================
The Virus Definitions CD contains the following files. We have
separated them into various directories which are listed below.
1. All of the Intelligent Updater packages.
\VIRUSDEF\ALPHA mmddA32.ZIP Dec Alpha Definitions .ZIP
file. Unzip the contents of this file
into \Program files\Common Files\
Symantec Shared\Virusdefs\Incoming
\VIRUSDEF\X86\OS2 mmddO32.ZIP Os/2 Definitions .ZIP file.
Unzip the contents of this file into
\SYMANTEC\COMMON\SHARED\VIRUSDEFS\
INCOMING
\VIRUSDEF\X86\DOSWIN16 mmddI16.EXE Intelligent Updater (v1.7)
This package will update:
Norton AntiVirus for DOS/Windows 3.x
Norton AntiVirus v2 for Windows 95
Norton AntiVirus v2 for Windows NT
NT Tools
NT Scanner
\VIRUSDEF\X86\DOSWIN16\DISK1 Multi-file, floppy disk version of
\VIRUSDEF\X86\DOSWIN16\DISK2 mmddI16.EXE. Copy these files onto
\VIRUSDEF\X86\DOSWIN16\DISK3 separate floppy disks and run
mmddi161.exe.
\VIRUSDEF\X86\NETWARE mmddN16.EXE Intelligent Updater (v1.7)
This package will update:
Norton AntiVirus for Netware
\VIRUSDEF\X86\NETWARE\DISK1 Multi-file, floppy disk version of
\VIRUSDEF\X86\NETWARE\DISK2 mmddN16.EXE. Copy these files onto
separate floppy disks and run
mmddN161.exe.
\VIRUSDEF\X86\WIN32 mmddI32.EXE Intelligent Updater (v4.0)
This package will update:
Norton AntiVirus 4.0 for Windows 95/98
Norton AntiVirus 5.0 for Windows 95/98
\VIRUSDEF\X86\WIN32\DISK1 Multi-file, floppy disk version of
\VIRUSDEF\X86\WIN32\DISK2 mmddI32.EXE. Copy these files onto
separate floppy disks and run
mmddI321.exe.
\VIRUSDEF\X86\ mmddX86.EXE Intelligent Updater (v2.0)
This package will update:
Norton AntiVirus 3.0 & 4.0 for
DOS/Windows
Norton AntiVirus 2.0 for Windows 95
Norton AntiVirus 4.0 for Windows 95/98
Norton AntiVirus 5.0 for Windows 95/98
Norton AntiVirus 2.0 for Windows NT
Norton AntiVirus 4.0 for Windows NT
Norton AntiVirus 5.0 for Windows NT
Norton AntiVirus for NetWare
pcANYWHERE 32, 7.5 for Windows NT
Norton Utilities 3.0 for Windows 95/98
Norton NT Tools
Norton Utilities 2.0 for Windows NT
2. Virus definitions for Live Update Administrator.
\VIRUSDEF\LUADMIN mmddyy.trx Live Update Administrator
Virus Definitions package. To use this
file, click the custom tab, select
browse and locate this file \virusdef\
luadmin\mmddyy.trx", select the
"automatically delete obsolete custom
updates" checkbox and then select
Merge to add these definitions to your
Live Update Server.
3. Miscellaneous information about SARC and the technologies we produce.
\SARC Various instructional videos and
documents that explain what SARC provides
to our customers.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.