1. BT_Voyager_1010_v1.0.7.8_driver.exe Driver
2. Readme.txt File Contents

Readme.txt Driver File Contents (BT_Voyager_1010_v1.0.7.8_driver.exe)

BT Voyager Wireless Utility v1.0.7.8
------------------------------------

Please read the following instructions carefully before you attempt to install this software.  

If you do not fully understand the following instructions call the BT Voyager Helpdesk for assistance.



MINIMUM SYSTEM SPECIFICATIONS:
-----
BT Voyager 1010:
Interface:		1 x Free USB Port.
Processor:		Pentium II or equivalent.
Operating System:	Windows 98 Second Edition (Windows 98 First edition is not supported), 
			Windows ME, Windows 2000, Windows XP Pro, Windows XP Home.
Memory:			32MB (64MB is strongly recommended).
Hard Disk Space:	20 Mbytes of available space.
-----
BT Voyager 1020:
Interface:		1 x Type II PCMICA slot.
Processor:		Pentium II or equivalent
Operating System:	Windows 98 Second Edition (Windows 98 First edition is not supported), 
			Windows ME, Windows 2000, Windows XP Pro, Windows XP Home.
Memory:			32MB (64MB is strongly recommended).
Hard Disk Space:	20 Mbytes of available space.
-----


This version of the BT Voyager Wireless utility can be used to connect the BT Voyager 1010 
(USB) and BT Voyager 1020 (PCMCIA) wireless network adapters to the BT Voyager 2000 
and BT Voyager 2100 Wireless ADSL Routers.  This software is not compatible with and will 
not be supported when used in conjunction with any other Wireless Network Adapters.

Before installing please make sure that your BT Voyager 1010 or BT Voyager 1020 Wireless 
Network Adapter is not connected to your PC and that any BT Voyager Wireless Utility 
software has been deinstalled through either Add/Remove Programs or via the BT Voyager 
folder located in the Start Menu - Programs list.  Once this is done run the Doctor3 
application  that is included in this download then reboot your PC.  After the reboot is completed run the setup 
application and connect the BT Voyager 1010 or BT Voyager 1020 to the PC when prompted.  
Do not connect the BT Voyager 1010 or BT Voyager 1020 to the PC until you are asked to do 
so by the installation software.  Connecting the 1010 or 1020 adapter too early may cause 
installation problems and result in a connection that does not work.


If you have any questions or problems we strongly recommend that you call the BT Voyager 
Helpdesk for assistance.


CONTACT DETAILS
BT Technical Helpdesk:
Telephone:- 0906 302 0288 (All calls are charged at 50p per minute and will last a maximum of 20 minutes)

Opening hours:-	Monday to Friday 9am to 6pm
		Saturday 9am to 5.30pm
		We are Closed on Sundays and all public holidays.