DriverGuide
English Português Español Deutsch Français 中国 Italiano 日本語 Translate
 
 

Sigmatel STAC9752_53 wdm/pa1.ini Driver File Contents

Driver Package File Name:

Sigmatel_STAC9752_53_wdm.zip

(381.8 KB)


# Generated by UJ Circuit Analyzer
# Wednesday, September 05, 2003 - 5:05:12 PM
# StacSrv version 4159
# Driver version 4159
# RJL 09/08/03 Change GpioMuxType from 5 to 0.  Is should always be 0.
# RJL 09/22/03 Add presets for internal speakers
# RJL 09/23/03 Change Jack5 MicBiasPolarity from 0 to 1.
# RJL 11/25/03 Add DisableSubwooferAtMono = 0 to correct driver change problem.

[Models]
;all MODEL files (except perhaps STAC97.ini) should have a self-reference here.
;self-reference:
PCI\VEN_8086&DEV_24D5&subsys_0601107B= this

[DelRegKeys]
# Specify the registry keys to be deleted during Uninstall
HKCU\Software\Sigmatel\Settings=Yes    ; Delete the current user's settings subkey
HKCU\Software\Sigmatel\JackSense=Yes   ; Delete the current user's jacksense subkey
HKCU\Software\Sigmatel\JackSense2=Yes  ; Delete new user key
HKLM\Software\Sigmatel\JackSense2=Yes  ; both of them
HKR\Settings=Yes                       ; Delete the driver's settings subkey
HKR\JackSense=Yes                      ; Delete the driver's jacksense subkey
HKLM\Software\Sigmatel\Presets=Yes

# The following 2 keys cause the volume settings to be 'forgotten' during Uninstall
HKCU\Software\Microsoft\Windows\CurrentVersion\Applets\Volume Control\SigmaTel Audio=Yes
HKU\Software\Microsoft\Windows\CurrentVersion\Applets\Volume Control\SigmaTel Audio=Yes

[Apps]
# Specify the application software to install
TinyUJ2 = No
SSWiz = Yes
StacSysTray = Yes
StacIt = Yes
PassThru = YesInvisible

# The following keys are used by StacSrv.application
[HKLM\Software\SigmaTel\Jacksense2]
RegistryVersionNum   = dword: 0x1     ; Newer registry format based on jacks, not pins
PollingPeriod        = dword: 333     ; 333 millliseconds
JSOscFreq            = dword: 16000   ; Set jacksense oscillator frequency to 16kHz
DockSupport          = dword: 1   ; Bios Interface dock support

# Policies
PolicyHPMuteSpkrs      = dword: 0x01ff    ; Plugging in any headphones mutes all speakers
#PolicyDefaultBassMgmt  = dword: 1         ; 1 = Enable 2.1 bass management at startup
#PolicyOnly1Input       = dword: 0x01ff    ; For multiple codecs
PolicyMicInsertSelect  = dword: 0x01ff    ; Inserted Mic gets selected.
PolicySpkrMuteSpkrs    = dword: 0x100
PolicyConfigurator     = dword: 1         ; Use Master Configuratator of the Universe

# Specify whether to route Line-Out/Front directly from Dac A or from the Analog Mixer
# The JackSense registry key “DigitalModel” should always be specified and set to Dword:1 
# in harmony w/ the driver setting EmulateAllMasters (binary) 01

DisableAnalogMixer   = dword: 1     ; 1 = Dac A, 0 = mixer

# The following keys specify the number of different setups displayed
# by the Jack Sharing applet, and the mode that they support.  This will
# subsequently effect the menu item displayed by the Jack Sharing applet.
# Typically 4 modes used are 2 (Headphones), 4 (Stereo Speakers), 5 (Quad), and 7 (5.1)

#    0 = None
#    1 = Mono Speaker
#    2 = Headphones
#    3 = Stereo Speakers (narrow)
#    4 = Stereo Speakers (wide)
#    5 = Quadraphonic (4 channel)
#    6 = Surround (4 channel)
#    7 = 5.1 Surround (6 channel)
#    All other values are invalid

NumSpkrSetups     = dword: 0x0000   ; The number of setups defined.

#
# This section is used to change the default
# name of the jack panels
[HKLM\Software\Sigmatel\JackSense2\PanelLabels]
Panel1 = "Side Panel"                 ; This is AC97JackLocationCode 1 = jlFrontPanel

#default Values
#Panel0 = "Rear Panel"
#Panel1 = "Front Panel"               ; or Side Panel as in above for Piranha
#Panel2 = "Internal"                  ; or Motherboard
#Panel3 = "Dock"
#Panel4 = "Reserved"                  ; 4 thru 7 are reserved for future use or definition by AC97.

# The following sections define which pins are connected to jacks
# Each pin will have properties associated with it such as the color of the jack,
# where it is located, and which mode (front, rear, center/lfe) to select when a
# speaker is plugged in and autoconfigure is set.

# DefaultSpeakerMode specifies which channels to configure if JackSense is
#  active and AutoConfigure is set and speakers are plugged into the jack

[HKLM\Software\Sigmatel\JackSense2\Codec2]	
GpioMuxIndex = dword: 5
GpioMuxType  = dword: 0


################################################################################
[HKLM\Software\Sigmatel\JackSense2\Jack1]	 ;  0 : 0 - Front Panel Pink Jack
#   
JackColor                = dword: 10		 ; Pink
JackLocation             = dword: 1		 ; Front Panel
JackPanelOrder           = dword: 1		 ; # 0
ParentCodecIndex         = dword: 0		 ; Codec 0
PinIndex                 = dword: 0		 ; Pins35/36
DefaultSpeakerMode       = dword: 6		 ; jsCenterLFE
PinConfiguration         = dword: 1		 ; jsMic
GpioSwitch               = dword: 3		 ; JackSwitch GPIO = GPIO 3
GpioMux                  = dword: -1		 ; No GPIO Crosspoint Mux
GPIOInverted             = dword: 0		 ; Inverted

MicBias                  = dword: 1		 ; Mic Bias GPIO = GPIO 1
MicBiasMode              = dword: 0		 ; Normal
MicBiasPolarity          = dword: 1		 ; True

# SupportedDevices, AutoConfigure, and Notify specify bitmaps of which devices to allow:
SupportedDevices         = dword: 0x0077	 ;   - jsNone - jsMic - jsPwrSpkr - jsSurround - jsCenterLFE - jsLineIn
Notify                   = dword: 0x0001	 ;   - jsNone
AutoConfigure            = dword: 0x0000	 ;   - jsbmAllOff
AutoConfigSupport        = dword: 0x0000	 ;   - jsbmAllOff

Jack sense algorithm controls
JSAlgorithm              = dword: 1		 ;    jsaGood
JSReadingsTotal          = dword: 30		 ;    30
JSReadingsGood           = dword: 5		 ;    5

# Items directly derived from schematic review
DaisyChain               = dword: -1		 ;    No Daisy Chain
OutputCapSize            = dword: 2		 ;    3.3 Ceramic
DirectConnect            = dword: -1		 ;    True
FiveOhmResistorPresent   = dword: -1		 ;    True
HasIntelFrontPanelHeader = dword: 0		 ;    False
ImpedanceGtrThan16k      = dword: -1		 ;    True
IsDeviceSupported        = dword: 0		 ;    False
IsolatedSwitch           = dword: -1		 ;    True

################################################################################
[HKLM\Software\Sigmatel\JackSense2\Jack2]	 ;  0 : 1 - Front Panel Green Jack
#   
JackColor                = dword: 5		 ; Green
JackLocation             = dword: 1		 ; Front Panel
JackPanelOrder           = dword: 2		 ; # 1
ParentCodecIndex         = dword: 0		 ; Codec 0
PinIndex                 = dword: 1		 ; Pins39/41
DefaultSpeakerMode       = dword: 2		 ; jsPwrSpkr
PinConfiguration         = dword: 3		 ; jsHeadphone
GpioSwitch               = dword: 5		 ; JackSwitch GPIO = GPIO V
GpioMux                  = dword: -1		 ; No GPIO Crosspoint Mux
GPIOInverted             = dword: 1		 ; Not Inverted

MicBias                  = dword: -1		 ; Mic Bias GPIO = gpioUnassociated
MicBiasMode              = dword: 0		 ; Normal
MicBiasPolarity          = dword: 0		 ; False

# SupportedDevices, AutoConfigure, and Notify specify bitmaps of which devices to allow:
SupportedDevices         = dword: 0x007D	 ;   - jsNone - jsPwrSpkr - jsHeadphone - jsSurround - jsCenterLFE - jsLineIN
Notify                   = dword: 0x0001	 ;   - jsNone
AutoConfigure            = dword: 0x0000	 ;   - jsbmAllOff
AutoConfigSupport        = dword: 0x0000	 ;   - jsbmAllOff

Jack sense algorithm controls
JSAlgorithm              = dword: 1		 ;    jsaGood
JSReadingsTotal          = dword: 30		 ;    30
JSReadingsGood           = dword: 5		 ;    5

# Items directly derived from schematic review
DaisyChain               = dword: -1		 ;    No Daisy Chain
OutputCapSize            = dword: 3		 ;    100 uF 25V Alum
DirectConnect            = dword: 1		 ;    True
FiveOhmResistorPresent   = dword: 0		 ;    False
HasIntelFrontPanelHeader = dword: 0		 ;    False
ImpedanceGtrThan16k      = dword: 1		 ;    True
IsDeviceSupported        = dword: 0		 ;    False
IsolatedSwitch           = dword: -1		 ;    True

################################################################################
[HKLM\Software\Sigmatel\JackSense2\Jack3]	 ;  0 : 2 - Front Panel Gray Jack
#   
JackColor                = dword: 8		 ; Gray
JackLocation             = dword: 1		 ; Front Panel
JackPanelOrder           = dword: 3		 ; # 2
ParentCodecIndex         = dword: 0		 ; Codec 0
PinIndex                 = dword: 7		 ; Pins23/24
DefaultSpeakerMode       = dword: 5		 ; jsSurround
PinConfiguration         = dword: 2		 ; jsPwrSpkr
GpioSwitch               = dword: 6		 ; JackSwitch GPIO = GPIO X
GpioMux                  = dword: -1		 ; No GPIO Crosspoint Mux
GPIOInverted             = dword: 0		 ; Inverted

MicBias                  = dword: -1		 ; Mic Bias GPIO = gpioUnassociated
MicBiasMode              = dword: 0		 ; Normal
MicBiasPolarity          = dword: 0		 ; False

# SupportedDevices, AutoConfigure, and Notify specify bitmaps of which devices to allow:
SupportedDevices         = dword: 0x01F5	 ;   - jsNone - jsPwrSpkr - jsSurround - jsCenterLFE - jsLineIn - jsSpdifOut -jsSpdifin
Notify                   = dword: 0x0001	 ;   - jsNone
AutoConfigure            = dword: 0x0000	 ;   - jsbmAllOff
AutoConfigSupport        = dword: 0x0000	 ;   - jsbmAllOff

Jack sense algorithm controls
JSAlgorithm              = dword: 1		 ;    jsaGood
JSReadingsTotal          = dword: 30		 ;    30
JSReadingsGood           = dword: 5		 ;    5

# Items directly derived from schematic review
DaisyChain               = dword: -1		 ;    No Daisy Chain
OutputCapSize            = dword: 2		 ;    3.3 Ceramic
DirectConnect            = dword: 1		 ;    True
FiveOhmResistorPresent   = dword: 0		 ;    False
HasIntelFrontPanelHeader = dword: 0		 ;    False
ImpedanceGtrThan16k      = dword: 1		 ;    True
IsDeviceSupported        = dword: 0		 ;    False
IsolatedSwitch           = dword: -1		 ;    True

################################################################################
[HKLM\Software\Sigmatel\JackSense2\Jack4]	 ;  1 : 3 - Dock Blue Jack
#   
JackColor                = dword: 6		 ; Blue
JackLocation             = dword: 3		 ; Dock
JackPanelOrder           = dword: 4		 ; # 3
ParentCodecIndex         = dword: 1		 ; Codec 1
PinIndex                 = dword: 7		 ; Pins23/24
DefaultSpeakerMode       = dword: 5		 ; jsSurround
PinConfiguration         = dword: 0		 ; jsNone
GpioSwitch               = dword: 2		 ; JackSwitch GPIO = GPIO 2
GpioMux                  = dword: 0		 ; Mux State 0
GPIOInverted             = dword: 0		 ; Inverted

MicBias                  = dword: -1		 ; Mic Bias GPIO = gpioUnassociated
MicBiasMode              = dword: 0		 ; Normal
MicBiasPolarity          = dword: 0		 ; False

# SupportedDevices, AutoConfigure, and Notify specify bitmaps of which devices to allow:
SupportedDevices         = dword: 0x0075	 ;   - jsNone - jsPwrSpkr - jsSurround - jsCenterLFE - jsLineIn
Notify                   = dword: 0x0001	 ;   - jsNone
AutoConfigure            = dword: 0x0000	 ;   - jsbmAllOff
AutoConfigSupport        = dword: 0x0000	 ;   - jsbmAllOff

Jack sense algorithm controls
JSAlgorithm              = dword: 1		 ;    jsaGood
JSReadingsTotal          = dword: 30		 ;    30
JSReadingsGood           = dword: 5		 ;    5

# Items directly derived from schematic review
DaisyChain               = dword: -1		 ;    No Daisy Chain
OutputCapSize            = dword: 2		 ;    3.3 Ceramic
DirectConnect            = dword: 1		 ;    True
FiveOhmResistorPresent   = dword: 0		 ;    False
HasIntelFrontPanelHeader = dword: 0		 ;    False
ImpedanceGtrThan16k      = dword: 1		 ;    True
IsDeviceSupported        = dword: 0		 ;    False
IsolatedSwitch           = dword: -1		 ;    True

################################################################################
[HKLM\Software\Sigmatel\JackSense2\Jack5]	 ;  1 : 4 - Dock Pink Jack
#   
JackColor                = dword: 10		 ; Pink
JackLocation             = dword: 3		 ; Dock
JackPanelOrder           = dword: 5		 ; # 4
ParentCodecIndex         = dword: 1		 ; Codec 1
PinIndex                 = dword: 0		 ; Pins35/36
DefaultSpeakerMode       = dword: 6		 ; jsCenterLFE
PinConfiguration         = dword: 1		 ; jsMic
GpioSwitch               = dword: 3		 ; JackSwitch GPIO = GPIO 3
GpioMux                  = dword: 1		 ; Mux State 1
GPIOInverted             = dword: 0		 ; Inverted

MicBias                  = dword: 1		 ; Mic Bias GPIO = GPIO 1
MicBiasMode              = dword: 0		 ; Normal
MicBiasPolarity          = dword: 1		 ; True

# SupportedDevices, AutoConfigure, and Notify specify bitmaps of which devices to allow:
SupportedDevices         = dword: 0x0077	 ;   - jsNone - jsMic - jsPwrSpkr - jsSurround - jsCenterLFE - jsLineIn
Notify                   = dword: 0x0001	 ;   - jsNone
AutoConfigure            = dword: 0x0000	 ;   - jsbmAllOff
AutoConfigSupport        = dword: 0x0000	 ;   - jsbmAllOff

Jack sense algorithm controls
JSAlgorithm              = dword: 1		 ;    jsaGood
JSReadingsTotal          = dword: 30		 ;    30
JSReadingsGood           = dword: 5		 ;    5

# Items directly derived from schematic review
DaisyChain               = dword: -1		 ;    No Daisy Chain
OutputCapSize            = dword: 2		 ;    3.3 Ceramic
DirectConnect            = dword: 1		 ;    True
FiveOhmResistorPresent   = dword: -1		 ;    True
HasIntelFrontPanelHeader = dword: 0		 ;    False
ImpedanceGtrThan16k      = dword: 1		 ;    True
IsDeviceSupported        = dword: 0		 ;    False
IsolatedSwitch           = dword: -1		 ;    True

################################################################################
[HKLM\Software\Sigmatel\JackSense2\Jack6]	 ;  1 : 5 - Dock Green Jack
#   
JackColor                = dword: 5		 ; Green
JackLocation             = dword: 3		 ; Dock
JackPanelOrder           = dword: 6		 ; # 5
ParentCodecIndex         = dword: 1		 ; Codec 1
PinIndex                 = dword: 1		 ; Pins39/41
DefaultSpeakerMode       = dword: 2		 ; jsPwrSpkr
PinConfiguration         = dword: 2		 ; jsPwrSpkr
GpioSwitch               = dword: 2		 ; JackSwitch GPIO = GPIO 2
GpioMux                  = dword: 1		 ; Mux State 1
GPIOInverted             = dword: 0		 ; Inverted

MicBias                  = dword: -1		 ; Mic Bias GPIO = gpioUnassociated
MicBiasMode              = dword: 0		 ; Normal
MicBiasPolarity          = dword: 0		 ; False

# SupportedDevices, AutoConfigure, and Notify specify bitmaps of which devices to allow:
SupportedDevices         = dword: 0x007D	 ;   - jsNone - jsPwrSpkr - jsHeadphone - jsSurround - jsCenterLFE - jsLineIn
Notify                   = dword: 0x0001	 ;   - jsNone
AutoConfigure            = dword: 0x0000	 ;   - jsbmAllOff
AutoConfigSupport        = dword: 0x0000	 ;   - jsbmAllOff

Jack sense algorithm controls
JSAlgorithm              = dword: 1		 ;    jsaGood
JSReadingsTotal          = dword: 30		 ;    30
JSReadingsGood           = dword: 5		 ;    5

# Items directly derived from schematic review
DaisyChain               = dword: -1		 ;    No Daisy Chain
OutputCapSize            = dword: 3		 ;    100 uF 25V Alum
DirectConnect            = dword: 1		 ;    True
FiveOhmResistorPresent   = dword: 0		 ;    False
HasIntelFrontPanelHeader = dword: 0		 ;    False
ImpedanceGtrThan16k      = dword: 1		 ;    True
IsDeviceSupported        = dword: 0		 ;    False
IsolatedSwitch           = dword: -1		 ;    True

################################################################################
[HKLM\Software\Sigmatel\JackSense2\Jack7]	 ;  1 : 6 - Dock Black Jack
#   
JackColor                = dword: 0		 ; Black
JackLocation             = dword: 3		 ; Dock
JackPanelOrder           = dword: 7		 ; # 6
ParentCodecIndex         = dword: 1		 ; Codec 1
PinIndex                 = dword: 5		 ; Pins21/22
DefaultSpeakerMode       = dword: 5		 ; jsSurround
PinConfiguration         = dword: 5		 ; jsSurround
GpioSwitch               = dword: 3		 ; JackSwitch GPIO = GPIO 3
GpioMux                  = dword: 0		 ; Mux State 0
GPIOInverted             = dword: 0		 ; Inverted

MicBias                  = dword: -1		 ; Mic Bias GPIO = gpioUnassociated
MicBiasMode              = dword: 0		 ; Normal
MicBiasPolarity          = dword: 0		 ; False

# SupportedDevices, AutoConfigure, and Notify specify bitmaps of which devices to allow:
SupportedDevices         = dword: 0x0075	 ;   - jsNone - jsPwrSpkr - jsSurround - jsCenterLFE - jsLineIn
Notify                   = dword: 0x0001	 ;   - jsNone
AutoConfigure            = dword: 0x0000	 ;   - jsbmAllOff
AutoConfigSupport        = dword: 0x0000	 ;   - jsbmAllOff

Jack sense algorithm controls
JSAlgorithm              = dword: 1		 ;    jsaGood
JSReadingsTotal          = dword: 30		 ;    30
JSReadingsGood           = dword: 5		 ;    5

# Items directly derived from schematic review
DaisyChain               = dword: -1		 ;    No Daisy Chain
OutputCapSize            = dword: 2		 ;    3.3 Ceramic
DirectConnect            = dword: 1		 ;    True
FiveOhmResistorPresent   = dword: 0		 ;    False
HasIntelFrontPanelHeader = dword: 0		 ;    False
ImpedanceGtrThan16k      = dword: 1		 ;    True
IsDeviceSupported        = dword: 0		 ;    False
IsolatedSwitch           = dword: -1		 ;    True

################################################################################
[HKLM\Software\Sigmatel\JackSense2\Jack8]	 ;  1 : 7 - Dock Orange Jack
#   
JackColor                = dword: 3		 ; Orange
JackLocation             = dword: 3		 ; Dock
JackPanelOrder           = dword: 8		 ; # 7
ParentCodecIndex         = dword: 1		 ; Codec 1
PinIndex                 = dword: 2		 ; Pins43/44
DefaultSpeakerMode       = dword: 6		 ; jsCenterLFE
PinConfiguration         = dword: 6		 ; jsCenterLFE
GpioSwitch               = dword: 4		 ; JackSwitch GPIO = GPIO E
GpioMux                  = dword: 0		 ; Mux State 0
GPIOInverted             = dword: 0		 ; Inverted

MicBias                  = dword: -1		 ; Mic Bias GPIO = gpioUnassociated
MicBiasMode              = dword: 0		 ; Normal
MicBiasPolarity          = dword: 0		 ; False

# SupportedDevices, AutoConfigure, and Notify specify bitmaps of which devices to allow:
SupportedDevices         = dword: 0x0075	 ;   - jsNone - jsPwrSpkr - jsSurround - jsCenterLFE - jsLineIn
Notify                   = dword: 0x0001	 ;   - jsNone
AutoConfigure            = dword: 0x0000	 ;   - jsbmAllOff
AutoConfigSupport        = dword: 0x0000	 ;   - jsbmAllOff

Jack sense algorithm controls
JSAlgorithm              = dword: 1		 ;    jsaGood
JSReadingsTotal          = dword: 30		 ;    30
JSReadingsGood           = dword: 5		 ;    5

# Items directly derived from schematic review
DaisyChain               = dword: -1		 ;    No Daisy Chain
OutputCapSize            = dword: 2		 ;    3.3 Ceramic
DirectConnect            = dword: 1		 ;    True
FiveOhmResistorPresent   = dword: 0		 ;    False
HasIntelFrontPanelHeader = dword: 0		 ;    False
ImpedanceGtrThan16k      = dword: 1		 ;    True
IsDeviceSupported        = dword: 0		 ;    False
IsolatedSwitch           = dword: -1		 ;    True

################################################################################
[HKLM\Software\Sigmatel\JackSense2\Jack9]	 ;  0 : 8 - Internal Amp
#   
JackColor                = dword: 0		 ; Black
JackLocation             = dword: 2		 ; Internal Amp
JackPanelOrder           = dword: 9		 ; # 8
ParentCodecIndex         = dword: 0		 ; Codec 0
PinIndex                 = dword: 2		 ; Pins43/44
DefaultSpeakerMode       = dword: 2		 ; jsPwrSpkr
PinConfiguration         = dword: 2		 ; jsLineOut
GpioSwitch               = dword: -1		 ; JackSwitch GPIO = gpioUnassociated
GpioMux                  = dword: -1		 ; No GPIO Crosspoint Mux
GPIOInverted             = dword: 0x1		 ; gpioUnassociated

MicBias                  = dword: -1		 ; Mic Bias GPIO = gpioUnassociated
MicBiasMode              = dword: 0		 ; Normal
MicBiasPolarity          = dword: 0		 ; False

# SupportedDevices, AutoConfigure, and Notify specify bitmaps of which devices to allow:
SupportedDevices         = dword: 0x0004	 ;   - jsPwrSpkr
Notify                   = dword: 0x0000	 ;   - jsbmAllOff
AutoConfigure            = dword: 0x0000	 ;   - jsbmAllOff
AutoConfigSupport        = dword: 0x0000	 ;   - jsbmAllOff

Jack sense algorithm controls
JSAlgorithm              = dword: 1		 ;    jsaGood
JSReadingsTotal          = dword: 30		 ;    30
JSReadingsGood           = dword: 5		 ;    5

# Items directly derived from schematic review
DaisyChain               = dword: -1		 ;    No Daisy Chain
OutputCapSize            = dword: 1		 ;    1.0 uF
DirectConnect            = dword: 1		 ;    True
FiveOhmResistorPresent   = dword: 0		 ;    False
HasIntelFrontPanelHeader = dword: 0		 ;    False
ImpedanceGtrThan16k      = dword: 1		 ;    True
IsDeviceSupported        = dword: 0		 ;    False
IsolatedSwitch           = dword: 0		 ;    False

[HKR\Settings]

EmulateAllMasters = hex: 1
DigitalMasterControlsAnalog = hex: 1
DockedIfJustCodecReady = hex: 1
EnableLinearVolumes = hex: 0
MakeCodecsPlayInParallel = hex: 1
DisableCDIn = hex: 1
MuteInactiveDac = hex: 0
SPDIFInMute = hex: 1
SPDIFInSharesJackWithAnalogIn = hex: 1
DisableHeadphone = hex: 1
DisableLnlvl = hex: 1
DisableWaveIn2 = hex: 1
DisablePCBeep = hex: 0
DisablePhone = hex: 1
SPDIFInSupportVariant = hex: 1
DisableMonoOut = hex: 1
DisableAux = hex: 1
DisableVideo = hex: 1
Disable3DControl = hex: 1
DisableMonoVirtual = hex: 1
DisableMICSelect = hex: 1
DisableLineInFromPlayback = hex: 1
DisableMicFromPlayback = hex: 1
DisablePeakmeters = hex: 1
EnableSPDIFIn = hex: 1
MICBoost = hex: 1
MasterControlsAux = hex: 1
MasterControlsMono = hex: 1
RecMuxMuteAtFloor = hex: 0
MICSelect = hex: 0
3DDepthEnable = hex: 0
PCBeepMute = hex: 0
PhoneMute = hex: 1
CDMute = hex: 1
VideoMute = hex: 1
AuxMute = hex: 1
EnableExtAmpControl = hex: 0
EnableNonPCMOnWin2K = hex: 1
EnableStereoMic = hex: 1
MultichannelEnabledByUser = hex: 1
EnableNewVolumeControls = hex: 1
DisableStereoVirtual = hex: 1
DisableMono2Virtual = hex: 1
DisableStereo2Virtual = hex: 1

# These settings control the values loaded into the AC97 registers by the driver.
# This allows setting the configuration prior to any applets running.

#######################################################
# the following settings setup 2 channel plus Mic and
# Line-In on the system, plus 6 channel on the dock.
# Be careful with R6E.  Only 1 codec can be inputting
# at a time.  Setting the off codec to slots 6-9 will
# effectively disable it.
#######################################################

0_76588384_R64	=hex:14, 91	; Hand edited to select DacA instead of mixer
0_76588384_R66	=hex:03, 02
0_76588384_R68	=hex:62, 00
0_76588384_R6E	=hex:40, 90
0_76588384_R3E	=hex:00, 00
0_76588384_R4C	=hex:08, 00
0_76588384_R4E	=hex:f8, ff
0_76588384_R54	=hex:06, 00
 
2_76588384_R64	=hex:0A, D0	; Hand edited to select DacA instead of Mixer
2_76588384_R66	=hex:06, 06
2_76588384_R68	=hex:01, 60
2_76588384_R6E	=hex:60, 90
2_76588384_R3E	=hex:00, 00
2_76588384_R4C	=hex:0c, 00
2_76588384_R4E	=hex:fc, ff
2_76588384_R54	=hex:02, 00

BiosInterfaceAddress      = dword: 0x000004E1	 ; address in physical memory
BiosInterfaceAddressEnd   = dword: 0x00000000	 ; address in physical memory

############################################################
#The following settings must be hand-edited in the INI file
############################################################

# This SPDIFSharedPinMuxBIts value is required when we have SPDIF OUT on the same jack as any analog inputs/outputs (LINE IN, REAR etc.).
# When user enables SPDIF OUT driver uses this mask to check if this jack is configured as analog input or output
# and if it is it will remember that SPDIF OUT is on but actually won't turn it on until this jack is reconfigured
# as digital input/output. Digital input/output means that this jack is turned off in reg 64 and is not selected as
# input source in reg 66.
# Last three bits are shared pin mux bits from register 66
# In all higher bits the  1  should be provided at position of the bit that powers shared pin in reg. 64.
# Below we have bit 15 set, which powers pin43/44 and 5 is mux value of pin 43/44 in reg66.
SPDIFSharedPinMuxBits   =DWORD:0x0042 ; pin 23/24 is shared with SPDIF on PA1

DockCodecID               = hex: 2
PCMVolumeFixedLevel       = hex: 08, 08   ; only meaningful in analog or DigitalMasterControlsAnalog mode
WaveInMux          = hex: 00, 00, 00, 00  ; normally Mic

DisableSubwooferAtMono = hex:1	; RJL 12/02/03 (was 0)

#    Volume units are represented in fixed point hexadecimal, 
#    in the same units that the OS passes to the driver.
#                                        [ADC Gain]      [Output volume]             [Input Volume]
#                                        [Reg 0x1C]      [Regs 2,4,6,36,38]    [Regs A,C,E,10,12,14,16,18]
#  +22.5 dB   16.8000h = 0x00168000   max slider                                              
#  +12 dB =   0C.0000h = 0x000C0000   1/4 slider                                  max slider
#  +06 dB =   06.0000h = 0x00060000                                               1/2 slider
#    0 dB =   00.0000h = 0x00000000   min slider         max slider               1/4 slider
# -0.5 dB = FFFF.8000h = 0xFFFF8000
#   -1 dB = FFFF.0000h = 0xFFFF0000
#   -6 dB = FFFA.0000h = 0xFFFF0000                      1/2 slider               1/8 slider
#  -12 dB = FFFA.0000h = 0xFFFF0000                      1/4 slider               1/16 slider
#  -18 dB = FFFA.0000h = 0xFFFF0000                      1/8 slider
#-35.5 dB = FFDD.8000h = 0xFFDD8000                                               min slider
#  -46 dB = FFD2.0000h = 0xFFD20000                      min slider

MICAtRecMuxVolume  = hex: 63, D0, 13, 00  ; (0-168000)
MICVolume          = hex: 90, 56, 08, 00  ; (ffdd8000-c0000), (5 bit control).
CDVolume           = hex: 89, F5, FF, FF  ; (ffdd8000-c0000), (5 bit controls).

MasterVolume       = hex: 00, 00, FA, FF

# Other settings
# RJL 09/08/03 Change GpioMuxType from 5 to 0.  Is should always be 0.

# Sevice launched stacserve flag
[HKLM\Software\Sigmatel\Service]
bStacSrvLoad = dword: 1

#####################################################################
# Presets
# For PA1 2 EQ presets are defined: InternalSpeakers (Default) and Bypass (Headphones, external speakers, etc)
#
# presets currently must be hand-entered into the ini file.
# 
[HKR\Settings\EQ]
NumBands = dword: 20

[HKLM\Software\Sigmatel\Presets\Application]
NumPresets	= dword: 2

# Preset1 = No external front or headphones
Preset1		="Default"
Preset1Mask	= dword: 0x00000c00
Preset1Value    = dword: 0x00000000

# Preset2 = External Speakers
Preset2		="Bypass"
Preset2Mask	= dword: 0x00000400
Preset2Value	= dword: 0x00000400

[HKLM\Software\Sigmatel\Presets\Application\Default]
EQ="Default"

[HKLM\Software\Sigmatel\Presets\Application\Bypass]
EQ="Bypass"

[HKLM\SOFTWARE\SigmaTel\Presets\EQ\Bypass\Band0]
Flags=dword:0xffffff80

[HKLM\SOFTWARE\SigmaTel\Presets\EQ\Bypass\Band1]
Flags=dword:0xffffff80

[HKLM\SOFTWARE\SigmaTel\Presets\EQ\Bypass\Band2]
Flags=dword:0xffffff80

[HKLM\SOFTWARE\SigmaTel\Presets\EQ\Bypass\Band3]
Flags=dword:0xffffff80

[HKLM\SOFTWARE\SigmaTel\Presets\EQ\Bypass\Band4]
Flags=dword:0xffffff80

[HKLM\SOFTWARE\SigmaTel\Presets\EQ\Bypass\Band5]
Flags=dword:0xffffff80

[HKLM\SOFTWARE\SigmaTel\Presets\EQ\Bypass\Band6]
Flags=dword:0xffffff80

[HKLM\SOFTWARE\SigmaTel\Presets\EQ\Bypass\Band7]
Flags=dword:0xffffff80

[HKLM\SOFTWARE\SigmaTel\Presets\EQ\Bypass\Band8]
Flags=dword:0xffffff80

[HKLM\SOFTWARE\SigmaTel\Presets\EQ\Bypass\Band9]
Flags=dword:0xffffff80



# Fixed EQ - the following bands adjust for the internal speakers.
# Stereo
[HKLM\SOFTWARE\SigmaTel\Presets\EQ\Default\Band0]
Frequency=dword:180
BandWidthx1000=dword:1000
Gainx1000=dword:-16000
Flags=dword:0x00010301

# Left
[HKLM\SOFTWARE\SigmaTel\Presets\EQ\Default\Band1]
Frequency=dword:290
BandWidthx1000=dword:880
Gainx1000=dword:4300
Flags=dword:0x00020100

#Right
[HKLM\SOFTWARE\SigmaTel\Presets\EQ\Default\Band2]
Frequency=dword:330
BandWidthx1000=dword:1000
Gainx1000=dword:3200
Flags=dword:0x00040200

#Stereo
[HKLM\SOFTWARE\SigmaTel\Presets\EQ\Default\Band3]
Frequency=dword:560
BandWidthx1000=dword:1250
Gainx1000=dword:-9400
Flags=dword:0x00080300

# Left
[HKLM\SOFTWARE\SigmaTel\Presets\EQ\Default\Band4]
Frequency=dword:1160
BandWidthx1000=dword:300
Gainx1000=dword:2900
Flags=dword:0x00100100

# Right
[HKLM\SOFTWARE\SigmaTel\Presets\EQ\Default\Band5]
Frequency=dword:1270
BandWidthx1000=dword:400
Gainx1000=dword:3400
Flags=dword:0x00200200

# Left
[HKLM\SOFTWARE\SigmaTel\Presets\EQ\Default\Band6]
Frequency=dword:2200
BandWidthx1000=dword:350
Gainx1000=dword:2600
Flags=dword:0x00400100

# Right
[HKLM\SOFTWARE\SigmaTel\Presets\EQ\Default\Band7]
Frequency=dword:2700
BandWidthx1000=dword:500
Gainx1000=dword:3900
Flags=dword:0x00800200

# Stereo
[HKLM\SOFTWARE\SigmaTel\Presets\EQ\Default\Band8]
Frequency=dword:5398
BandWidthx1000=dword:500
Gainx1000=dword:-6900
Flags=dword:0x01000300

# Stereo
[HKLM\SOFTWARE\SigmaTel\Presets\EQ\Default\Band9]
Frequency=dword:11300
BandWidthx1000=dword:50
Gainx1000=dword:-22000
Flags=dword:0x02000300









Copyright © 1996 - DriverGuide is an iCentric Corporation Company.     All rights reserved.    
server: web5, load: 1.17